1+1 Inner Ear Loop Mask Machine

1+1 Inner Ear Loop Mask Machine

  • Detail
  • Parameters

Automatic Inner Ear Loop Mask Making Machine (1+1)

Description of the equipment

Fully Automatic Mask Production Line (1+1) can only produce disposable flat masks, not N95 and three-dimensional masks. Whether the mask is medical is not related to the machine. As long as the mask is sterilized, the mask produced by this equipment can be used for surgical masks.

This machine is mainly used for automatic forming of plane mask:the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically;the nose bridge strip is rolled up for traction and unrolled. After cutting with a fixed length, it’s enter into the edge cloth. The two sides are welded to the seal by ultrasonic welding, and then are sealed by ultrasonic lateral sealing,then cut to shape by cutter.The mask is transported to two mask ear belt welding stations through the assembly line, and finally formed through ultrasonic welding.The mask will be transported to the flat belt line for collection through the assembly line after finished.

Production flow chart

Roll material is unwinded and conveyed by rollers. Multi-layer fabrics are folded and closed by the roller mechanism. The nose bridge coil is unwinded. After cutting to a fixed length, it is transmitted and wrapped, ultrasonically welded and sealed, and cut in sections to form a single mask; and then the mask is transferred to the earloop welding machine, the earloop is automatically welded by the ultrasonic welding machine, and then transferred to the edge sealing position for welding and sealing, and then stacked onto belt conveyor.

The details are shown as following drawing:

Main Technical Parameters

Production capacity: 60 ~ 80 pcs / min

Daily production capacity: about 70-90 thousandEquipment failure rate: ≤5%Suitable for woven fabric width dimension: one layer≤195mm, two layer≤185mm, three layer≤175mmSuitable for coil spinning specifications: The maximum outer diameter is Φ600mm, and the core is 3 inches (Φ76.2±5mm)Suitable for coiled nose bridge specifications: The maximum outer diameter is Φ450mm, and the core is ≥Φ100mmSuitable mask layers: 3/4 layer non-woven flat mask

 Equipment Dimensions: about 5371MM (length) * 2367MM (width) * 2200MM (height)Whole line movement: Floor type roller movementThe weight of the whole line: about 1100kgPower supply: AC220V±10%/50Hz/less than 10KwEnvironmental requirements: No flammable, explosive and corrosive gas 25℃±5℃; 40~85%RHAir supply: 0.5~0.7Mpa, dry air supply.

Mask type: inner ear loop medical mask with edge folding on both wide sides.

Equipment list supplied by seller

Equipment Name
Raw material unwinding frame
1 set

Mask body making machine
1 set


Ear loop welding machine with both sides of sealing

Electrical control system
1 set
PLC+HMI, famous brand components
Pnumatic system
1 set

Drive system
1 set



The seller reserve the right to modify above technical specification, component brand and overall appearance for upgrading the equipment and ensuring the delivery time without prior notice to buyers. The details shall be subject to the actual delivery.

medical mask or surgical mask
60 ~ 80 pcs / min
about 10KW
AC 220V/380V  50/60Hz±10%
Air Supply
0.5~0.7 MPa
Overall size
about 5371MM (length) * 2367MM (width) * 2200MM (height)